The “load more items” button on the bottom of the page is not working. Please scroll up to the top where it says “show” and click on another number to move the page.
The legendary Bont Platinum blade is back. Made with Böhler K390 powder metal tool steel which is slow ground to produce a perfectly straight piece of steel. The powder metal structure is very fine which gives exceptional gliding properties. Able to hold its edge up to 8 times longer than normal steel blades the tube has the highest bend retention of any blade on the market.
The legendary Bont Platinum blade is back. Made with Böhler K390 powder metal tool steel which is slow ground to produce a perfectly straight piece of steel. The powder metal structure is very fine which gives exceptional gliding properties. Able to hold its edge up to 8 times longer than normal steel blades the tube has the highest bend retention of any blade on the market.
The legendary Bont Platinum blade is now 20% stiffer. Made with Böhler K390 powder metal tool steel which is slow ground to produce a perfectly straight piece of steel. The powder metal structure is very fine which gives exceptional gliding properties. Able to hold its edge up to 8 times longer than normal steel blades. The new tube inner structure has the highest bend retention of any blade on the market.
Top quality short track boots, newly designed in 2023 to replace the Z. Bont Platinum blades are now available in flex as well as the standard and X.
Black
Navy
Red
High quality nylon exterior with cotton fleece interior and reinforced with cut resistant fabric at the ends.
The latest Viking chassis. Based on the characteristics of the world-famous Nagano skate, but made with the most innovative production methods as used in the top model of the Viking bases (the Sapphire). The result is a great steerable and stable skate that everyone can use. An iconic competition skate, faster, even better and with the lightest construction within the Viking line-up.
The latest Viking chassis. Based on the characteristics of the world-famous Nagano skate, but made with the most innovative production methods as used in the top model of the Viking bases (the Sapphire). The result is a great steerable and stable skate that everyone can use. An iconic competition skate, faster, even better and with the lightest construction within the Viking line-up.
With the specific properties of the tube, the special
wide bracket, the high quality materials and the
perfected welding method, the Sapphire offers a
sensational new Viking feeling.
With the specific properties of the tube, the special
wide bracket, the high quality materials and the
perfected welding method, the Sapphire offers a
sensational new Viking feeling.
Bringing Good Luck to all who wear them!
MADE FROM
85% Cotton, 10% Polyester, 5% Spandex
The Bont short track ceramic sharpening stone is designed for professional short track skaters. The grit is 8000. This stone should be used as your final polishing stone while sharpening your short track blades. Polishing stones help you to increase your glide while skating.
The Bont PRO thermo-mouldable shin guard is designed for professional athletes yet is suitable for all levels. They are made with superior performance carbon layers which disperse the impact.
The Dutch Secret that you won’t want to live without!!! No more slips, no need for bandaids for your fingers! This super cool invention combines the burr cutting magic of carbide in a finger saving case. It stays square to ensure a perfect edge every time. Adjusts to different blade thicknesses automatically. Created and produced in the Netherlands by Goud-Sport. This one is a must-have in every sharpening kit!!
Long Track clap blades that come with standard European spacing or with 165-195 spacing to fit on short track and inline boots.
New Product!! Level 4 cut protection dyneema gloves with dipped tips.
NEW FABRIC – Thinner, more comfortable fabric with Level 4 protection. Satra ANSI and EN388 test. EN388 for speedskating and ANSI for North American Hockey
High performance carbide deburring tool cuts the burr in a minimum of strokes. You’ll wonder how you ever lived without it!
Unisex model Fully made of Dyneema (Dynamix) exclusive to Apogee YKK auto-lock front closure Tested to meet ISU standards Made in Canada
Junior Sizes : 8 – 10 – 12 – 14 – 16
Resistance: Cut level 3 EN388
Great flexibility, strong and cut resistant DYNEEMA® super fiber combined with Polyester and Elastan
During the design process, our R&D team was constantly in contact with the technical committee of the ISU. That’s is why we can guarantee that the Alpha-3 meets all the recent safety guidelines AND adaptations that still have to be implemented.
With the Alpha-3 helmet, you will be sure to have a certified helmet, now and in the future!
This combined with a stylish and aerodynamic design makes the Alpha-3 a helmet even the most conservative skaters like to wear!
Bringing Good Luck to all who wear them!
MADE FROM
85% Cotton, 10% Polyester, 5% Spandex
Bringing Good Luck to all who wear them!
MADE FROM
85% Cotton, 10% Polyester, 5% Spandex
Bringing Good Luck to all who wear them!
MADE FROM
85% Cotton, 10% Polyester, 5% Spandex
Bringing Good Luck to all who wear them!
MADE FROM
85% Cotton, 10% Polyester, 5% Spandex
Bringing Good Luck to all who wear them!
MADE FROM
85% Cotton, 10% Polyester, 5% Spandex
Bringing Good Luck to all who wear them!!
MADE FROM
85% Cotton, 10% Polyester, 5% Spandex
Bringing Good Luck to all who wear them!!
MADE FROM
85% Cotton, 10% Polyester, 5% Spandex
Bringing Good Luck to all who wear them!!
MADE FROM
85% Cotton, 10% Polyester, 5% Spandex
Bringing Good Luck to all who wear them!!
MADE FROM
85% Cotton, 10% Polyester, 5% Spandex
Bringing Good Luck to all who wear them!!
MADE FROM
85% Cotton, 10% Polyester, 5% Spandex
Bringing Good Luck to all who wear them!!
MADE FROM
85% Cotton, 10% Polyester, 5% Spandex
Bringing Good Luck to all who wear them!!
MADE FROM
85% Cotton, 10% Polyester, 5% Spandex
Bringing Good Luck to all who wear them!!
MADE FROM
85% Cotton, 10% Polyester, 5% Spandex
Bringing Good Luck to all who wear them!!
MADE FROM
85% Cotton, 10% Polyester, 5% Spandex
Bringing Good Luck to all who wear them!!
MADE FROM
85% Cotton, 10% Polyester, 5% Spandex
Bringing Good Luck to all who wear them!!
MADE FROM
85% Cotton, 10% Polyester, 5% Spandex
Blade Protection
New soakers made with microfiber material and cotton lining for water absorption.
Clear pocket stitched on one end for identification purposes
A cool set of wheels for your keys! This detailed version of the newest Cádomotus 3×125 Versatile inline skate with 3 spinning wheels is super fun to hang on your keys, or just to decorate your bag or hang from the rear view mirror. Top quality product.
Resistance: Cut level 2 EN388
super fiber combined with Polyester and Elastan
Conforms to ISU regulation 1265
Resistance: Cut level 2 EN388
super fiber combined with Polyester and Elastan
Conforms to ISU regulation 1265
All the safety gear you need to get started! Kit includes helmet, neck guard, gloves, shin guards, knee pads, ankle cuffs and goggles.
Please specify sizes in the text box on the order summary page.
The BNT boot is a step up from the Z. Unlike the Z which is constructed with carbon and fiberglass, the BNT is made with 100% carbon which makes it stiffer than the Z.
The BNT boot is a step up from the Z. Unlike the Z which is constructed with carbon and fiberglass, the BNT is made with 100% carbon which makes it stiffer than the Z.
This BOA edition adds a BOA dial for getting your skates on quickly and easier to make small adjustments.
The Bont short track Z boot gives you the stiffness and ultra light weight that you would find in a $1000+ ST boot for a fraction of the cost. The Z is made with a 3k plain weave carbon fiber composite base. The carbon is sourced exclusively from the world’s #1 carbon manufacturer, Toray in Japan, and for extra support we have put 10 layers of Toray carbon fiber around the ankle.
The legendary Bont short track Platinum K390 ice blade is back. Made with Böhler K390 powder metal tool steel which is slow ground to produce a perfectly straight piece of steel. The powder metal structure is very fine which gives exceptional gliding properties. Able to hold its edge up to 8 times longer than normal steel blades the tube has the highest bend retention of any blade on the market.
The Z boot gives you the stiffness and ultra light weight that you would find in a $1000+ ST boot for a fraction of the cost. The Z is made with a 3k plain weave carbon fiber composite base. The carbon is sourced exclusively from the world’s #1 carbon manufacturer, Toray in Japan, and for extra support we have put 10 layers of Toray carbon fiber around the ankle.
The Cádomotus Alpha-3Y is the multi-sport helmet all kids should be wearing. Certified for speed skating, short track & cycling | XS/S (48-54cm)
The Cádomotus Alpha-3Y is the multi-sport helmet all kids should be wearing. Certified for speed skating, short track & cycling | XS/S (48-54cm)
The Cádomotus Alpha-3Y is the multi-sport helmet all kids should be wearing. Certified for speed skating, short track & cycling | XS/S (48-54cm)
The Cádomotus Alpha-3Y is the multi-sport helmet all kids should be wearing. Certified for speed skating, short track & cycling | XS/S (48-54cm)
The Cádomotus Alpha-3Y is the multi-sport helmet all kids should be wearing. Certified for speed skating, short track & cycling | XS/S (48-54cm)
Top quality, made in Canada. Waxed laces specifically for speed skates.
ILSS Corner belt available in several funky colours. A must-have tool for dryland training. Made in Canada.
CLEARANCE!
This stone is a tad short for regular sharpening, but it’s a handy tool for a quick fix of a stripped edge or nick. 2″x8″ and it comes with a leather pouch so it’s simple to pack in your competition kit.
These skating suits have the same features as all renowned brands, but at a lower price! The skating suit is made of different fabrics, including 3 different types of lycra, and a rubber Pu fabric.
The new rubber coating provides a tighter fit than the previous suits, this supports your muscles and you are pressed into the ideal skating position. The different Lycra parts are spread over the suit, for example the leg already consists of the 3 unique Italian fabrics that have been extensively tested to create the ideal fit.
Choose either of the colors or an assorted pack. Plastic tips. Glue onto clean gloves with any type of Super glue.
Just a couple small sizes left. Please email or phone for information.
Carbon fibre glove tips. Reduce friction and increase glove life with this performance product.
Black only.
Product dimensions: 13” x 5.5” x 13”
Not just for dryland skating, the COREFX Skill Slide can be used as a training tool in various types of training applications.
Fun for dryland activities and games. Great for developing balance and strength. Bright colors. Also nice for foot massages.
Relieve minor aches, tension and pains, promote blood flow and increase circulation with this set of 1 x 7 cm and 1 x 9 cm Sensory Massage Ball Set.
This flat rung agility ladder is great for the field or in the gym. With nylon covered metal rungs it’s virtually indestructible. Develop quick feet, improve coordination, speed and explosive power.
• 4m length.
Speed and Agility Ladder. 8 rung. Comes with a carrying bag.
Short Track skaters feel indestructible. It’s an attitude that lets them challenge all limits. Introducing the Patriot Carbon. Look close. Listen up. It’s not hard to find our rich tradition of clean lines and outspoken attitude in our latest Short Track Model. We’re a brand that continues to refuse conventional thinking while taking our very own classic designs at least one step further every time. The Patriot is a boot that should cost over $1000 with hand laid carbon fiber and Bonts’ unique pressure wrap system that removes more excess resin than any other carbon lay-up technique.
Full Protection Short Track suits by Apogee. Fully lined with Dynamix.
Apogee Short Track suits made of top quality lycra and made in Canada. Built in knee and shin pads. These suits do not have cut protection.
Available in youth sizes 10, 12, 14, 16 and adult sizes XS – XXXL
The R Series 2 or R2 is a hand made carbon composite boot made with Bont’s famous one-piece construction method. The boot is made by hand from the inside out with every layer bonding or sewn to the layer under it. The boot fits like a glove and offers high-end performance at an entry-level price. Bonts’ unique pressure wrap system that removes more excess resin than any other carbon lay-up technique.
Features
Level 4 cut resistant gloves made of polyethylene cut resistant fibers with Pu coated palm and fingers
Black
White
Lightweight and comfortable. Great fit. Spiderlock tightener in back. Meets ISU regulations. Two colors available.
Inmold helmet
54-58cm S/M
58-62cm L/XL
Lightweight and comfortable. Great fit. Spiderlock tightener in back. Meets ISU regulations. Black with silver writing. XS one color only.
Inmold helmet
Fits 48-54 cm
PRO-SHIELD Low Cut / Cut resistant socks Adult / Senior SMALL / SMALL (2-4)
Protection against 360-degree cuts from the ankle bone to the calf
50% Cut resistant material, 35% Nylon, 5% Spandex, 10% Polyester
Adult Size Cut resistant ankle cuffs. Made of Dynamix, these cuffs conform to Speed Skating Canada’s regulations. Fabric is now grey.
Come in Youth and Adult sizing. Pricing is different between sizes.
Newly designed by Apogee for I Love Speed Skating, these warm up jackets are light enough to allow you to move and warm enough to keep you comfortable. Made in Canada.
Full Zip warm up pants allow you to put them on and take them off with your skates on. Perfect for keeping warm pre and post race. Zips from the top for quick removal just before your race. Top quality product custom made in Canada by Apogee for I Love Speed Skating.
Full Zip warm up pants allow you to put them on and take them off with your skates on. Perfect for keeping warm pre and post race.
SKATE-TEC Dyneema neck protector. If you were a fan of the Maple neck guard you will find this one very familiar. Very comfortable.
4 sizes : S, M, L, XL
2 sizes protective neckguard
Senior : 13.5″ – 17″ (34 – 43cm)
Junior : 10″ – 14″ (26-35cm)
2 sizes protective neckguard
Senior : 14.5″ – 17.5″ (36 – 43cm)
Junior : 11″ – 14″ (27-35cm)
This new product developed specifically for short track speed skating provides a high level of protection against cuts. Its 3D ergonomic design and the anti abrasion velcro system will fit perfectly. Very comfortable.
This new product developed specifically for short track speed skating provides a high level of protection against cuts. Its 3D ergonomic design and the anti abrasion velcro system will fit perfectly. Very comfortable.
PRICE REDUCED TO CLEAR REMAINING STOCK. 44 and 45 only
Buckle In and Zip Up for a more Aerodynamic Ride!If you want the best speed skating boot that money can buy, look no further than the Vaypor. Tested by the world’s best skaters and designed by Mr. Inze Bont. This version is the standard version which integrates both the buckle lace cover and YKK zipper lace cover.
The Boa Vaypor replaces the lower laces on the boot with a Boa dial. Bont is the only professional speed boot maker to have the official Boa license.
If you want the best speed skating boot that money can buy, look no further than the Vaypor. Tested by the world’s best skaters and designed by Mr. Inze Bont. The top of the boot uses laces and a top velcro strap and the bottom section uses a Boa dial. The benefit of this system is that you can make the top of the boot extremely tight and you can adjust the bottom section while you are skating. This is useful to tighten your boots mid-marathon before the sprint or you may want to loosen your boots during training without having to retie your laces.
The Vaypor is made to order and not kept in stock.
Fast, sleek, and built to win! The GT4 inline speed skate combines the best speed skate construction with a minimalist look.
The Jet is the world’s most popular speed skate and for good reason. It is extremely good value for money, it’s supportive, comfortable and made by hand using Bont’s unique one piece manufacturing technique.
The Bont Luna is the only entry-level speed skate on the market to be made using one-piece manufacturing, a manufacturing technique found on custom boots costing over $1000. The Luna has a distinctive sleek, fast look utilizing a low toe box and thin padding to make this boot look fast and feel responsive.
The Lap Board is a must-have tool for every long track speed skating coach.
The Lap Board Will help the coach communicate with his skaters by clearly displaying lap times to them during races, assisting them to make the necessary adjustments to their pace.
Quick change numbers in an easy to hold carrying case.
The Lap Board is a must-have tool for every long track speed skating coach.
The Lap Board Will help the coach communicate with his skaters by clearly displaying lap times to them during races, assisting them to make the necessary adjustments to their pace.
Quick change numbers in an easy to hold carrying case.
Fast, sleek and built to win!
The Bont Luna is the only entry-level speed skate on the market to be made using one-piece manufacturing, a manufacturing technique found on custom boots costing over $1000. The Luna has a distinctive sleek, fast look utilizing a low toe box and thin padding to make this boot look fast and feel responsive.
Carbon fiber boot suitable for intermediate and advanced skaters. Seamless design and heat-moldability for comfort. Colours may vary, ask about availability.
Entry-level fiberglass boot. Seamless design and heat-moldability for comfort. Colours may vary, ask about availability.
This inline speed skate is available in size 37 to 40 and takes 4x 100mm wheels or 3x 110mm. Additional purchase of the Resizer Insoles together with Rookie One size 37 offers an adjustable boot-sizing solution in the range 35 to 37!
This inline speed skate for children offers extra high ankle support and is available in size 37 to 42. This skate takes 4x 100mm wheels or 3x 110mm. Additional purchase of the Resizer Insoles together with Rookie One size 37 offers an adjustable boot-sizing solution in the range 35 to 37!
This inline speed skate supports the ankle better and transforms a 4x100mm or 4x110mm skate into 3x125mm. You can have all possible inline skate configurations for the price of just one speed skate. Start with 4×100 millimeter wheels when you are a beginner, then upgrade to 3 or 4x110mm and finally go on 3 big 125mm inline skate wheels for higher speeds!
The Bont Jet is the world’s most popular inline speed skate and for good reason; it’s extremely good value for money. Perfect for all levels of speed skating, the racing boot is supportive, comfortable and made by hand using Bont’s unique one piece manufacturing technique.
The Bont Jet is the world’s most popular inline speed skate and for good reason; it’s extremely good value for money. Perfect for all levels of speed skating, the racing boot is supportive, comfortable and made by hand using Bont’s unique one piece manufacturing technique.
The Bont Semi-Race is aimed at inline skaters who want the comfort of a trainer with the performance of a speed skate. The skate uses Bont’s famous one piece construction and is built around a last that has been modified and improved for over 40 years by Mr. Inze Bont. The boot comes with a heat moldable tongue and incorporates our super mold technology making it extremely heat moldable. The tongue is injection molded heat moldable EVA like the foot bed. The boot is a lot stiffer than other skates in the trainer market and the stiffness comes from within, so there is no need for an external brace to give the boot stiffness. Start training with the Bont Semi-Race inline racing skate.
The Z is made with a 3k plain weave carbon fiber composite base. The carbon is sourced exclusively from the world’s #1 carbon manufacturer, Toray in Japan. In the front, air vents pump air into the boot which are built into the TPU protective bumper. The Z skate starts out being built around a last that has been modified and improved for over 40 years by Mr. Inze Bont. The epoxy resin is the most heat moldable in the industry. Under the liner is a high quality memory foam that is 3mm thick and 50A in hardness so your energy doesn’t get absorbed by the boot.
Complete inline kit: boots, frames, wheels, bearings.
3PF 7050/110mm Red Magic/Jesa Black Bearings
The Bont A frames can fit on short track boots or inline boots and are an economical way to start inline. This kit includes Bont A Frames, 3 x 100mm wheels and Bont Abec 7 bearings.
The Cado Motus Neo Transformer frames can fit on short track boots or inline boots and are an economical way to start inline.
This kit includes Cado Motus Frames, 3 x 110 mm Bont wheels and Bones Mini Logo bearings
The Cado Motus Neo Transformer frames can fit on short track boots or inline boots and are an economical way to start inline. This kit includes Cado Motus Frames, 4 x 100 mm Argon wheels and Bont Abec 7 bearings.
CXXV 6061/125mm Red Magic Aluminum hub/Jesa Black bearings
CXXV 7005/125mm Red Magic Aluminum hub/Jesa Black bearings
New inline set with Pennington ABEC 7 bearings. 165 spacing for short track boots and 195 for inline boots. 4 x 100mm wheels.
New inline set with Pennington ABEC 7 bearings. 165 spacing for short track boots and 195 for inline boots. 4 x 100mm wheels.
The 2PF 6061 gets you into Bont’s latest technology at an affordable price. The 6061 frame applies the same principles as the 7050 frame with the same great looks. The patented 2 point design is brought together with the best materials and the most advanced inline frame computer stress test simulations on earth.
The CXXV’s perfect flex control is your secret weapon. A frame that is too stiff skips across the road at the end of the push. A frame that is too soft will feel mushy and slow. The CXXV has the perfect amount of flex for maximum control.
The CXXV’s perfect flex control is your secret weapon. A frame that is too stiff skips across the road at the end of the push. A frame that is too soft will feel mushy and slow. The CXXV has the perfect amount of flex for maximum control.
The Cado Motus Neo Transformer frames can fit on short track boots or inline boots and are an economical way to start inline.
The Bont Elemental inline speed skating racing wheel is our mid-range wheel. It offers better roll, rebound and grip than our G14-G16 range of wheels.
The Bont Elemental inline speed skating racing wheel is our mid-range wheel. It offers better roll, rebound and grip than our G14-G16 range of wheels.
The Fastest Inline Speed Skating Wheel On Earth!
The Red Magic Hardcore is the first 125mm professional inline speed skating racing wheel to use an aluminum hub. 125mm wheels are a lot larger than 110mm wheels so there is a lot more flex that needs to be controlled. We feel that the best way to control this flex is by upgrading the hub from plastic to aluminum. The 125mm Red Magic Hardcore inline skate wheel has been an instant hit, winning the first race of the season in Berlin and it has won most of the inline world championships marathons since its release. The wheel has a full 24mm width, unlike some competitors that have opted for 20-22mm wheels. Version 2.0 now has a perfect bearing seat.
More speed and grip than ever before!
Cado Motus Xenon wheels 110mm. Great basic wheels for inline training and racing.
The MPC 125mm Street Fight wheels offer more advancement in speed and performance then any other wheel in its segment. The MPC Street Fight also brings variations in stiffness for those with the need to mix up your wheel base to optimise your speed/grip ratio.
Standard or variable rockering service on blades. Choose from various templates. Please contact us for more details.
Black frame with 100% clear lens
Frame construction using high density resin, lightweight and high strength impact resistance
UV400 safety lens, cannot been broken, crack or rust, prevent from ultraviolet light.
no distortion and dizziness.
Ultra durable polycarbonate lenses.
Suitable for adult skaters, these eye guards offer UV 400 protection.
Includes wrap around blue nylon frame and comfortable TPR nose pads.
Tested and passed ASTM F803 specifications.
Add the shield on outdoor marathons for protection from rain or cold. It will help you to keep warm. Detach the shield when racing in an indoor ice arena and get extra ventilation for your head. (Note…shield required for short track in Canada) Or detach the shield and use the helmet for inline or road cycling, taking advantage of the cooling airflow created by the seven minimized air vents.
Guaranteed unbreakable polycarbonate lenses! Suitable for senior skaters, these eye guards offer UV 400 protection. Wrap around black nylon frame and comfortable TPR nose pads. Tested and passed ASTM F803 specifications.
New! Great moldability and great value!
This complete tool allows perfect sharpening at right angles (90 degrees). The blade height adjustment is standard, another Apogee exclusive. Entirely made in Quebec, Canada .
New high-end CTX bender with tension gauge calculating the induced deformation and allowing greater precision.
This is the right binding if you are looking for the perfect balance between performance and stability and between low weight, ease of use and comfort.
Together with the NIS key, Rottefella Performance bindings can be moved forward or backwards to fit your individual skating technique.
Mounting of the binding is quick and easy.
The binding has an extra hard flex especially made for ice skating. (blades are not included)
The 608 inline self centering spacers for 608 bearings come in two styles. The red spacer is for aluminium hub wheels and the silver spacer for plastic hub wheels. You need 1 spacer per wheel.
Actual spacer size 10.35mm silver and 10.05mm red.
Sold individually (1 piece)
Bont ABEC 7 bearings have been designed for the derby skater. They have double shields to keep the dust and dirt out and the shield can easily be removed for cleaning. We sell the bearings lubricated with a light racing oil. This means you don’t have to clean out all the thick oil that you find in other bearings. The bearing has an exceptionally low rolling resistance for maximum speed!
Each set comes with 16 bearings.
BONT ABS protective finger tips
Protect your gloves from wear
Made from ABS
Long lasting
Easy to glue
Light weight
Black/Green
Black/Pink
Black/Red
New design! Skate pockets and straps on the sides, helmet pocket in the bottom and room for the rest of your gear on the inside.
Available in black/green, black/red or black/pink or black
The Bont Boss is a hand made carbon composite boot made with Bont’s famous one-piece construction method. The boot is made by hand from the inside out with every layer bonding or sewn to the layer under it. The boot fits like a glove and offers high-end performance at an entry-level price. Bonts’ unique pressure wrap system that removes more excess resin than any other carbon lay-up technique.
Red
Newly designed Bont Carbon boots teamed with Bont Ultrasprint blades.
Tube: 6005 aluminum alloy, Pre-bent
Runner: Japan steel 440A HRC 58
Cups: T-Shape multi positions 6000 aluminum alloy
Boots available in Black/Red or Black/Blue/White
The Bont inline carbon wedges interlock into each other. They are 1 mm thick. You can lock them together to form a wedge to tilt you blade or frame or you can reverse them to form a solid block.
The wedges can be used for inline speed skates. You can use them if you want to create an angle between your inline boot and the frame. Many elite inline speed skaters use these wedges to create a slight angle between the boot and the frame.
Bont Club boots are newly designed Patriots. Silver “Club” version to distinguish it from the regular black Patriots. Heat moldable and the same proven excellent quality that clubs have learned to love.
New Ultrasprint blades
Tube: 6005 aluminum alloy, Pre-bent
Runner: Japan steel 440A HRC 58
Cups: T-Shape multi positions 6000 aluminum alloy
Sizes: 12.0,13.0,13.5,14.0,14.5,15.0,15.5,16.0,16.5,17.0
Club orders 5 pairs or more $399 Less than 5 pairs $459
The Bont diamond short track burr stone has a grit of 600. That is an intermediate grit level that is not too harsh that it will damage your blade but also not too fine that it won’t get the burr off the blade. It’s the perfect grit level for short track blades.
BONT diamond sharpening stone
800/1600 grit
New honeycomb diamond technology.
Diamond surface is 8″ overall length is 11″
Diamond sheets are replaceable and held in place by magnets.
The GT3 is made with the best Japanese knife steel. It also benefits from all the technology, research and development of the new Platinum blade. This blade has the same materials as the Platinum apart from the steel. The GT3’s steel is tempered using our 20+ years of short track blade making expertise.
Application: Dry outdoor road or concrete surfaces
The Highroller has the highest rebound and longest wear of any wheel on the market. It is a super long lasting wheel which is very important for long races. At the end of a 42km marathon, these wheels still look brand new. A high amount of rebound is important for energy return. If you are ever at a race and not sure which wheel to use, this is the one to choose. It has the best all around qualities of any wheel in our range.
The Bont inline carbon wedges interlock into each other. They are 1 mm thick. You can lock them together to form a wedge to tilt you blade or frame or you can reverse them to form a solid block.
The Bont/Jesa Black Series is the best steel bearing we have ever made.
(Okay…I don’t have proof…that’s what Bont says! Awesome bearings for sure)
Stiffer than the Patriot, the Patriot Carbon Boa offers more support for skaters looking to achieve higher speeds. Add a Boa dial to fine tune the tightness of your boot between sets.
The Patriot is our entry level short track boot that offers exceptional value for money. A hand laid thermoplastic fiberglass base gives you a super stiff boot which is fully heat moldable utilizing epoxy thermoset resin. Combined with anatomical boot shape and high density memory foam, this boot is unsurpassed for value.
The Patriot is our entry level short track boot that offers exceptional value for money. A hand laid thermoplastic fiberglass base gives you a super stiff boot which is fully heat moldable utilizing epoxy thermoset resin. Combined with anatomical boot shape and high density memory foam, this boot is unsurpassed for value.
The Ultrasprint blade looks to take on the competition and better it in every way. That includes using better steel, brilliance polishing, a perfect bend, better bend retention and some awesome graphics to complete the look. All at an unbelievable price.
New features include:
– Updated last, Production has been upgraded to a one-piece boot. The cuff is higher and the angle of the cuff has been modified. Thicker padding on the collar. More carbon in the base of the boot. Suede-L lining
The Bont Patriot is our entry level short track ice skate that offers exceptional value for money. A hand laid carbon base gives you a super stiff boot which is fully heat moldable utilizing epoxy thermoset resin. Combined with anatomical boot shape and high density memory foam, this boot is unsurpassed for value
The BONT sharpening jig is designed to fit every brand of blade on the market and is the only jig you will ever need. Designed in Canada, it is lightweight, strong, compact and will not affect your blades bend while sharpening. It is easy to assemble and disassemble which is great if you need to travel to competitions.
Black/Pink
This backpack is smaller than our standard backpack to make it easier for kids to carry.
The ST Boa Vaypor replaces the lower laces on the boot with a Boa dial. Bont is the only professional speed boot maker to have the official Boa license.
If you want the best speed skating boot that money can buy, look no further than the Vaypor. Tested by the world’s best skaters and designed by Mr. Inze Bont. The top of the boot uses laces and a top velcro strap and the bottom section uses a Boa dial. The benefit of this system is that you can make the top of the boot extremely tight and you can adjust the bottom section while you are skating. This is useful to loosen your boots during training without having to retie your laces.
The legendary Bont Platinum blade is back. Made with Böhler K390 powder metal tool steel which is slow ground to produce a perfectly straight piece of steel. The powder metal structure is very fine which gives exceptional gliding properties. Able to hold its edge up to 8 times longer than normal steel blades the tube has the highest bend retention of any blade on the market.
The Vaypor is our top of the line Short Track boot. Changes to this years model include a new thinner, harder memory foam ankle padding and 10 layers of carbon fiber around the ankles for extra support.
The base is made by hand by sandwiching cross weave carbon and uni-directional carbon fiber which is embedded with epoxy thermo setting resin. The fibers are hand laid in the matrix according to the strain they will have to bear.
The legendary Bont Platinum blade is back. Made with Böhler K390 powder metal tool steel which is slow ground to produce a perfectly straight piece of steel. The powder metal structure is very fine which gives exceptional gliding properties. Able to hold its edge up to 8 times longer than normal steel blades the tube has the highest bend retention of any blade on the market.
Black
White
The Vaypor is Bont’s top of the line Short Track boot. Changes to this model include a new thinner, harder memory foam ankle padding and 10 layers of carbon fiber around the ankles for extra support.
The base is made by hand by sandwiching cross weave carbon and uni-directional carbon fiber which is embedded with epoxy thermo setting resin. The fibers are hand laid in the matrix according to the strain they will have to bear.
The Vaypor comes with three outer skin options. The newest style is a rubberized silver fiberglass outer skin which is super light weight, super strong and super exotic.
Black
White
Black
Blue
Grey
Pink
Red
Yellow
Waxed laces hold their tight position better than regular laces.
Available in black, red, yellow, pink, blue, black, and gray.
Top quality product designed specifically for speed skating and inline. Mesh pockets inside to hold your helmet and accessories. Plenty of room for your skates and gear. Fits as airline carry on.
Blue
Pink
Red
If you think all Short Track boots are the same, it’s time you took a look at the new Bont Z ST Boot. Equipped with new Boa tightening technology, this boot gives you the stiffness and ultra light weight that you would find in a $1000+ ST boot for a fraction of the cost. The Z is made with a 3k plain weave carbon fiber composite base. The carbon is sourced exclusively from the world’s #1 carbon manufacturer, Toray in Japan. In the front, air vents pump air into the boot which are built into the TPU protective bumper.
The Z boa boot gives you the stiffness and ultra light weight that you would find in a $1000+ ST boot for a fraction of the cost. The Z is made with a 3k plain weave carbon fiber composite base. The carbon is sourced exclusively from the world’s #1 carbon manufacturer, Toray in Japan. The Boa system allows you to quickly tighten your skates after your warm up and between sets without having to get off the ice or kneel down and get wet knees.
The legendary Bont Platinum blade is back. Made with Böhler K390 powder metal tool steel which is slow ground to produce a perfectly straight piece of steel. The powder metal structure is very fine which gives exceptional gliding properties. Able to hold its edge up to 8 times longer than normal steel blades the tube has the highest bend retention of any blade on the market.
Add a fixed heel-brake to your Cádomotus frames, or to most frames on the market. Suitable for all wheel diameters from 80-110mm.
This inline speed skate supports the ankle better and transforms a 3x125mm skate into 4x100mm or 4x110mm. You can have all possible inline skate configurations for the price of just one speed skate. Start with 4×100 millimeter wheels when you are a beginner, then upgrade to 3 or 4x110mm and finally go on 3 big 125mm inline skate wheels for higher speeds!
Black
Brilliant Green
Currant Purple
cyan
Olympian Blue
Orange
Pink
Red
Sacramento Green
Our most popular backpack. Plenty of room for all of your skating gear and lots of cool colors. Lightweight and ergonomically designed to contour against your back. So comfortable, you’ll forget you’re wearing it.
The Airflow XL has two main compartments with long zippers, re-designed side pockets, a helmet pocket, roll-up straps, reflective details for better visibility and safety, and provides enough space for all your race day essentials. It makes the Airflow XL one of the most versatile gear bags on the market.
11The NSX-III ice speed skating blades are the third generation of aluminum clap blades with an NSX profile and the successor to the Marchese Silver Saya.
The aluminum blades steer just as sensitive as steel blades, because of the NSX profile in the tube invented by the designers of Cádomotus. As a result, there is increasing flexibility in the middle of your foot helping you steer smoothly.
Blue
Red
Dedicated skaters know…there’s little else more important than keeping your skates in a rugged, secure and ventilated backpack. Comfortable to carry, in a bold and eye-catching design, the Versatile backpack is full of internal stay-dry storage options for all your skating equipment and accessories.
The ELEMENT is built on the same CBC World’s Best Fitting Last as the GENESIS and is constructed of lightweight and durable materials. At the heart of the dual composite support counter is our innovative Thermo-CSC, a heat activated molding medium. The ELEMENT wraps around the client’s foot to assure optional support, comfort and trust.
The ELEMENT boasts a torsion resistant (TR) chassis. This application ensures reduced flex in the sole of boot while maximizing the ability to create downward force into the ice. This boot is beautiful – if we do say so ourselves! – with functional patterns and increased strapping ability. Start your short track career off with this affordable, innovative boot and you will be well on your way to the top.
GENESIS and is constructed of lightweight and durable materials. At the heart of the dual composite support counter is our innovative Thermo-CSC, a heat activated molding medium. The ELEMENT wraps around the client’s foot to assure optional support, comfort and trust.
CBC ELement is a great way to enter the sport of short track speedskating with the most comprehensive beginner boot available on the skating market today.
The GENESIS long track boot features 100% Thermo-CSC, resulting in a molding outcome that is a near custom fit. It is designed to perform for both sprint and long-distance efforts.
Pro-Sharpening Frame comes complete with top-stops boasting hardened steel contact pins to ensure many years of consistent blade leveling.
The Triple Row Stopwatch is an essential tool for coaches and referees for sports training, tracking, running, etc. The Stopwatch features a lightweight frame and easy to operate system, with battery and lanyard included.
The COREFX Ignition Switch Harness is a powerful personal training tool for resistance training with athletes.
Increase explosive power and endurance with the COREFX Power System! There are endless training possibilities as you can customize your workout with the option to use the padded harness or soft-grip handles. Pair this with a sled to maximize your workout.
Equipment Features:
• One adjustable harness with padded shoulder straps
• An 8.3′ dual sled strap with heavy duty carabiners
• Two d-ring soft-grip pull handles
The Quantum is designed for skaters who prefer the added feel and feedback that a blade with more flex offers
EHS’s entry level clap offers a quality package for a cost effective price with the added option of 165/195 spacing to fit short track or inline boots.
7mm Electronic Bearing Cleaner with 8mm shaft
Simply slip your 627, 688 bearing onto the cleaner, dip it in your choice of cleaning solution and press the red button. The bearing spins and cleans out all the dirt, oil, and even mild rust. Fits all 7mm skate bearings
Heat moldable, durable entry level skate.
Discontinued model.
ONLY 37, 40 and 41 remaining
High performance entry-level boot features comfortable fit and exceptional durability.
A miracle for sore feet! There’s no need to suffer.
Great, form fitting pull-on anti-blister Booties available in three thicknesses so you can choose the one that enhances your specific shoe/boot fit . Ankle Booties allow your foot to grip your footwear better, yet offer protection from rubbing and blistering. These have been described to us a cross between sockless and wearing socks… so the best of both worlds! Features flatlock stitching for durability and stretch. We recommend the Ultrathin for custom or tight fitting boots.The 2mm gives light cushion and fills in small gaps. The 3mm fills in gaps in loose boots and reduces rubs and pressure from recreational boots.
A miracle for sore feet! There’s no need to suffer. The ultimate blister protection!
– Perfect for cold weather and water sports
– Creates friction barrier
– Insulates in cold weather
– More comfortable than traditional socks
– Works wet or dry
– Sold in pairs
The newest ankle bootie EzeefitskinsTM is marginally thicker (.087mm) than our Ultrathin material, but is considerably softer and has much more stretch. It also has a microfiber interior (logo goes on the outside) which feels like silk against your skin. The new Skins material also provides a bit more padding than our current Ultrathin material, yet takes up no more room. The light gray color disappears under a sock
Our newest Full-Foot bootie Ezeefitskins is only marginally thicker than our ultrathin Full-foot (.087 mm) but considerable softer and has more stretch. It also has a microfiber interior that feels likes silk against your skin. The new material also provides a bit more padding yet takes up no more room.
Light gray in color.
Completely adjustable. NEW! Top Notch™ traditional 3-piece Guardog™ design. Fits most types of speed skate blades. Available in many colors. Fit long track and short track blades. Made in Canada!
Blue
Pink
Completely adjustable. NEW! Top Notch™ traditional 2-piece & 3-piece Guardog™ design. Fits most types of speed skate blades. Available in many colors. Fit long track and short track blades. Made in Canada!
Blue
Coral
Light Green
Pink
Purple
Sapphire
White
Completely adjustable. NEW! Top Notch™ traditional 3-piece Guardog™ design. Fits most types of speed skate blades. Available in many colors. Fit long track and short track blades. Made in Canada!
Black
Blue
Lilly
Pink
Red
White
Completely adjustable. NEW! Top Notch™ traditional 2-piece & 3-piece Guardog™ design. Fits most types of speed skate blades. Available in many colors. Fit long track and short track blades. Made in Canada!
Blue
Gold
Green
Lime
Orange
Pink
Purple
Rainbow
Red
Royal blue
Silver
Completely adjustable. NEW! Top Notch™ traditional 2-piece & 3-piece Guardog™ design. Fits most types of speed skate blades. Available in many colors. Fit long track and short track blades. Made in Canada!
Completely adjustable. NEW! Top Notch™ traditional 3-piece Guardog™ design. Fits most types of speed skate blades. Available in many colors. Fit long track and short track blades. Made in Canada!
Black
Blue
Red
Keep your blades happy when you put them in your bag. These quality soakers are made in Canada, have full terry lining as well as nylon reinforcement in the toes and heels to help prevent blades from cutting through.
Available in red, blue, and black. One size fits all.
Ice rider Nordic skate blades. Ideal skate for lake skating / skate touring / Winter Triathlon. High quality fine grain fully ground steel runners with high quality frame. Step in a go. Nothing comes close to the comfort and speed you get with this type of setup for natural ice.
ILSS Baseball Shirts. Pre-order before Nov 23 and get exactly what you want. After that, there will be limited sizes and choices available in stock. Order now for pre-Christmas delivery! Picture shown is only a mock up. The print on the actual shirts will be clearer.
ILSS Baseball Shirts. Pre-order before Nov 23 and get exactly what you want. After that, there will be limited sizes and choices available in stock. Order now for pre-Christmas delivery! Picture shown is only a mock up. The print on the actual shirts will be clearer.
New!!! I Love Speed Skating “Fast Fox” t-shirts. Short sleeved performance fabric. Navy with colored print.
I Love Speed Skating hoodies. Taking pre-orders until Nov. 23. Order yours to get exactly what you’d like. Afterwards, there will be limited sizes and stock available. Order now for pre-Christmas delivery! Picture is just a mock up and not an actual illustration. The logo will be clearer on the actual product.
I Love Speed Skating hoodies. Taking pre-orders until Nov. 23. Order yours to get exactly what you’d like. Afterwards, there will be limited sizes and stock available. Order now for pre-Christmas delivery! Picture is just a mock up and not an actual illustration. The logo will be clearer on the actual product.
I Love Speed Skating hoodies. Taking pre-orders until Nov. 23. Order yours to get exactly what you’d like. Afterwards, there will be limited sizes and stock available. Order now for pre-Christmas delivery! Picture is just a mock up and not an actual illustration. The logo will be clearer on the actual product.
Rigid transport case for jig.
Ideal for transporting your jig during a competition or a trip. A great way to protect your investment at low cost.
Junior deluxe protective glasses, nylon frame. Meets ASTM F803 impact resistance standards. Comes with a strap.
FEATURES
– Contoured form-fitting design cradles knee
– Superior foam system absorbs hard impacts
– Streamline shape and design increases mobility
– Seamless interior finish provides ultimate comfort
– Ballistic nylon with industrial – weight stitching ensures durability
– Size specific caps create close contact with pad to minimize bulk
New version of the D-gel. High density foam knee protection covered with extensible nylon.
The best protection at a reasonable price.
Size : XS – S – M – L – XL
Just one pair remaining – 16″ 38/39
Introducing the brand new EDGE helmet from Nagano Skate.
Very light, comfortable it will give you an edge!
S-M: 55cm – 58cm
L-XL: 58cm – 61cm
ASTM and CE certified for speed skating.
The Nagano Skate Gold jig. Rotary tongs pinching system to avoid any tension on the blade. At 4.4 pounds, it’s lighter than any comparable option at much cheaper price. High density aluminium machined and anodized. Used by many international skaters. Made in Canada.
Only one remaining.
***Handcrafted and assembled in Canada with 100% Canadian materials***
Nagano Skate’s new sharpener, the Frank’s Signature Gold 2.1 is the best sharpener on the market. Designed and manufactured in Quebec, it is light (4.4lbs/ 2kg) and offers very high quality sharpening.
Made of precision-machined high-density aluminum, its locking mechanism with pivoting plates allows the blade to always be placed at 90 degrees, which allows for quick sharpening every time.
The Gold 2.1 sharpener is already used by several skaters on the international circuit.
It can even transform into a portable rockering machine very quickly and at a great price.
The new Golden Rocker machine makes all speed skaters accessible to precision and performance rockers. An innovation of the company Nagano Skate.
Nagano Skate IMPERIUM™ neck protector.
The neck protector from Nagano Skate has been designed to perfectly fit the shapes of the neck. It also has a sports fabric inside for absolute comfort.
For the junior size, it is 14″ wide, so we recommend it on kids from 7 years old and under.
For the adult size, we recommend it on any skater over 8 years old.
Black
Blue
Green
Mauve
Orange
Pink
Red
White
chrome
Nagano Skate QuickTips are made in Canada. They are made of ABS. Acrylonitrile butadiene styrene (ABS) is a thermoplastic polymer with good impact resistance, rigid and lightweight.
As we produce our own product, we guarantee the availability of all our colors.
***Handcrafted and assembled in Canada with 100% Canadian materials***
CHARLES HAMELIN’S CHOICE
Frank’s Signature Silver 2.1 sharpener offers the best value on the market. Designed and manufactured in Quebec, it is light (4.4 lbs/ 2kg) and offers very high quality sharpening. Made of high-density aluminum and very precisely machined, its unique fastening mechanism minimizes tension on the blades and ensures that the 2 blades are always placed at 90 degrees.
The Silver 2.1 version is compatible with all kinds of blades.
Not that speed skaters are smelly… Amazing NokOut is a powerful odour eliminator that targets odours without the use of enzymes or harsh chemicals. NokOut uses an oxidation process to break down odour molecules at the source. NokOut is 100% Biodegradable, Scent Free, Non-Toxic and Hypoallergenic. Nokout is available in a Spray, Shampoo and a specialized Skunk Odour Kit.
236ml spray
Pennington 8005AA blades are named for their double “A” shape cup-posts.This engineered structure went through stress test, brings out the optimal bending results around the posts. The company’s new engineering team went through numerous deformation and stress tests on various combination of different grades of aluminium and steel, aiming to find an ideal interaction between, and a smooth force transition from and to, the tubes and blades. 8005AA blades adopt the highest manufacturing engineering among all blades made by Pennington Skates by far.
Pennington 8005AA blades are named for their double “A” shape cup-posts.This engineered structure went through stress test, brings out the optimal bending results around the posts. The company’s new engineering team went through numerous deformation and stress tests on various combination of different grades of aluminium and steel, aiming to find an ideal interaction between, and a smooth force transition from and to, the tubes and blades. 8005AA blades adopt the highest manufacturing engineering among all blades made by Pennington Skates by far.
Carbon fiber boot suitable for intermediate and advanced skaters. Stiffer and lighter than their fiberglass counterpart. Seamless design and heat moldability for comfort. Colours may vary, ask about availability.
Designed for technical ST skaters with increased stiffness; leather inside provides additional comfort level.
Entry-level fiberglass boot suitable for beginners and clubs. Seamless design and heat moldability for comfort. Colours may vary, ask for availability.
Carbon fiber boot suitable for intermediate and advanced skaters. Seamless design and heat moldability for comfort. Customized color and pattern options available.
Flannel outer with absorbant inner. Reinforced toes and heels with cut resistant fabric.
Available in blue, yellow, red or white
Designed to feel like a second skin, Pro Knee Gaskets have been engineered for superior comfort and quality.
Featuring EVA memory foam padding combined with a breathable soft-feel Lycra sleeve, these knee gaskets mould and conform to the individual shape of your knees.
The elasticated anti-slip silicone banding keeps the pads in place so you’re free to move exactly how you want, while the low profile padding design makes them feel nearly invisible under your clothes or skinsuit.
These heavy duty pads are the ideal protection when rolling in skates, or any action sport in fact! The knee and elbow caps are both hard wearing against scrapes and impacts, while the wrist guard gives excellent support and comfort. Available in Red & Green!
The Gen 4 S1 Pro Knee Pad is thoughtfully designed with comfort, durability, stability and function in mind. We took great care in the design and development of this product and are very excited to bring our vision to reality. Four years in development and thousands of hours of wear testing we are very proud to introduce the Gen 4 S1 Pro Knee Pad. The Gen 4 Pro Knee pad is exactly the same in design and function as the first 3 generations but we have expanded and fine tuned the sizing by adding additional sizes for a more customized fit.
The S-ONE Starter Pad Set includes a quality set of knee pads, ebow pads and wrist guards. Parents love these starter pad sets because they can get all three sets of pads in one package at a bargain price. These pads are great for the little ones first set of pads because they are designed to fit smaller bodies and they are easy to put on. Please note: These pads are designed for low-medium impact skate park use. They are not designed for skating vert or big bowls. If you plan on bailing to your knees a lot, you might want to get Vert Knee Pads. The Starter Pad sets usually fit kids age 3 to 7 years old
Sizing Guide: Measure at the middle of the wrist, knee or elbow.
Circumferences are within these ranges.
Knee
8” to 11”
Elbow
7” to 10”
Wrist
4” to 7”
Brand S2 Skating Goggles TR90 Eyewear 3 Lens
Interchangeable lenses Yellow-Clear-Smoke
HD vision
UV 400 protection
Anti-fog
Comfortable nose piece
Anti-glare
The very best from Sebra Sports and DSM Dyneema (r). Fine glove with perfect fit.
Designed with exclusive impact caps and heavy duty fixing rivets, these pads are perfect for young recreational skaters. Providing great comfort and support with the protective liner covering top and bottom of the pads. The branded Velcro straps allows for a 360 wrap, and the pads are fitted with an elasticated support sock, all of which are designed to keep them comfortable and secure!
Youth sizes small, medium, large
Now featuring SFR’s Unique Impact Caps which give an increased protective area and improved quality, the SFR Essentials Junior Triple Pad Set is the perfect entry level protection set for any young beginner rider across multiple recreational sports. The high impact caps on the knee and elbow pads combined with the elastic straps give a quick and easy fit whist staying supportive and comfortable.
Youth sizes small, medium, large
These skate guards are suitable only for 12″ blades. (or hockey and figure skates)
Sturdy jig, very similar to the discontinued Maple Pro. Suitable for short track and long track blades.
Skate-Tec Short track speed skating helmet – Light weight construction – Adjustable
The ST M-Wave Firm blade provides superior grip while maintaining high levels of control and feel. The Firm version is the best blade that Skate-Tec currently manufactures. Providing the highest possible slip pressures, you will be able to penetrate the ice with confidence. The new M technology has 3 attachment points, offering increased rigidity and a better feel.
The Skate-Tec M-Wave Flex Blade offers superior grip while maintaining high levels of control and feel. The Flex version is very responsive, you will feel the blade turning on the ice for you, generating pressure. Great for lighter skaters or those who like to feel the blade working for them. The new M technology for cup mounting has 3 attachment points, which results in increased rigidity and a better feel. Skaters who use the flat top version experience a more stable blade, with flexibility in the front of the blade. The flat top on the tube creates a less “nervous” blade.
The Futuro L2T 12C27 blade is the entry-level model at Skate-Tec. It is made with a 12C27 steel blade. It is pre-bent and is the best blade on the market for beginner skaters. Few models of this quality are offered in this price range.
The Futuro L2T 12C27 blade is the entry-level model at Skate-Tec. It is made with a 12C27 steel blade. It is pre-bent and is the best blade on the market for beginner skaters. Few models of this quality are offered in this price range.
The entry-level boot from Skate-tec made with high performance features. They are made with lightweight carbon fiber shell which they provide exceptional stiffness and support. They are heat molding customizable. They have thermo foam on the ankle compartment for a better adjustment and fit. The outer is made with synthetic leather with exceptional durability.
Available Sizes: 33 to 46
The Skate Tec Nagano has a feeling reminiscent of the MapleZ Gold, but with a “runner” and a “pre-bent” found on the models M-Wave, Argon and QuarQ, which means an exceptional glide and a Constant pre-bent The blade has the same concepts and construction as the MapleZ Gold with a new gloss finish. If skaters need high stems, Skate-Tec Nagano can provide them.
Carbon
Matte Black
ST Helmet 013 Pro – Light weight construction – Adjustable
The TTT blade with the aluminum bridge from Skate-Tec is a very good all-round blade for beginners. The TTT offers the quality you are looking for at an affordable price. We recommend it without hesitation for your long track skating outings! For short track enthusiasts, this blade is the equivalent of the “Krypton”.
Chrome blade HRC 58
SKATE-TEC Tube bender
The perfect combination for beginners on the long track.
X-Boot: Ultra comfortable and quality boot
TTT: Very good quality chrome blade fitted with a standard Stainless bridge
HRC 58 blade
Manufacturer: Skate-Tec, Netherlands
Here are the X-Boot for long track speed skating. They were designed in the Netherlands by the company Skate-Tec.
These boots are of excellent quality and unparalleled comfort. Thermomoldable.
Sizes available: 34 to 46
The Triple Weld Blade with Aluminum Bridge from Skate-Tec is a great all-rounder, you will feel the blade connecting with the ice and generating pressure. These thermoformable boots are of excellent quality and unmatched comfort for the price.
• 10” x 16” / 25,4 cm x 40,64 cm
• One side Full Ice – with dry erase marker
• One side Half Ice – with clip to hold papers
Perfect coaching tool!
The T-Skate Pro is a lightweight skate with a shorter nose and 25m skating radius , as well as an adjustable length for NIS bindings. Works best on prepared tracks and fine sheets of ice. Hollow profile for Salomon SNS bindings as well as Rottefella NIS bindings. The blade is made of stainless steel from Swedish Sandvik. T-skate Pro is 100% Swedish-made and 100% recyclable.
Short track markers. Split design minimize freezing to the ice. High quality rubber.
Black
Blue
Light blue
Navy
Orange
Pink
Made in Canada, these soakers are double layer absorbent fabric, great value for a quality product. Available in black, blue, red, orange or blue stars, red floral or yellow floral. Fit blade lengths 12″ – 17″.
Polishing stone made from fine arkansite for a smooth finish on your blades
3 spacious compartments for storing skates, skates and or clothing separately for compartment with organizer compartments &
removable key ring, side pockets large enough for skates and extra front pocket
for shoes or helmet, etc. Removable hip strap! YKK zippers adjustable shoulder straps and back are
covered with breathable mesh fold-out reflective rain cover.
material: waterproof polyester
Outside dimensions: 57x35x28 cm
capacity: 40 liters
BACKPACK COLOR II
A sporty backpack consisting of a large compartment with an extra storage compartment on the back inside, and a front compartment with two smaller storage compartments. At the top there is a small compartment for keys, telephone or wallet. You can attach your keys to the handy clip in this box.
The adjustable outer flap can be used for storing a helmet or shoes. Your shoes, skates or skates can also be buckled on the sides in side pockets .
The carrying straps of the backpack are adjustable. The back surface is breathable . For protection against wind and rain, the backpack has a rain cover with its own storage compartment at the bottom. It is also useful to roll up your wet clothing after exercise! You attach the roll to the bottom of the backpack with two extra straps for this.
The bright colors of the rain cover and the reflective logo ensure that the backpack is clearly visible.
The lightweight Blazr blades are designed to give back pressure through flexibility, which results in great maneuverability. You will experience an easy shift of balance while maintaining fully in control. A stable though agile skate that catapults you through a turn.
The sturdy Bronze boot is super versatile and perfectly suited for the recreational to (young) competitive skater. This strong but lightweight tub shoe is thermoplastic deformable, comfortable and inexpensive
The Combi basic has an inner shoe of breathable antibacterial material and dual density foam for an optimal fit and comfort. The soft tongue makes for an easy entry.
A high Semi soft boot for maximum comfort and a stiff shaft for guaranteed stability. The closure consists of a lace and Velcro on the instep and a clip on the shaft.
A low skate, which is finished with a black powder coating.
Boot interior made of breathable antibacterial material and dual density foam for optimal fit and comfort.
High, semisoft boot for the best of both comfort and stability.
Clap blade with unique tube of high-quality plastic, and stainless steel blade. Clap technology consists of ball bearings, springs, and stainless steel fasteners. Pin can be inserted to close clap mechanism.
A set of arm bands for competing skaters, consisting of four bands in the colors white, yellow, red and blue. The straps are elastic for free movement but firm enough to prevents slipping down the arm. A non-slip strip on the inside further ensures that they stay in place during skating.
The Viking Eclipse offers as you can say ‘Best of both
worlds’. A chassis in the starting price category with the
character characteristics of a ‘pro’ skate. A
great base for the recreational and sporting skater who has quality and functionality as a priority
The special durable building of the gold boot is made of light but very strong kangaroo leather. The lining of high quality and soft-touch calf leather provides extra comfort, durability and minimal friction. The supplied wax laces are protected by a lacing of stretch leather for extra safety and prevent loose laces.
The special durable building of the gold boot is made of light but very strong kangaroo leather. The lining of high quality and soft-touch calf leather provides extra comfort, durability and minimal friction. The supplied wax laces are protected by a lacing of stretch leather for extra safety and prevent loose laces.
Personalize your own color
New on the Gold shoe is the innovative closing system with which the lace cap can be replaced and you can customize the shoe according to your own choice. With a choice of 20 nice colored caps you give your skate a completely different look. The hoods can be replaced in an instant with a patented ziplock system. Go for bright red, cozy yellow or exclusive gold or silver.
Blades for Viking marathon skates. Can be mounted with fixed points or as a clap mechanism.
Vikings new lightweight Children’s Skate is comfortable and adjustable to four different sizes. The durable and waterproof polyester shoe has good support and the fit is adjustable with a pull-knob on the heel. The children’s skate is very easy to close with the special lacing and simple fast-closing buckle. The special Velcro closure is convenient and also provides additional support. The Thinsulate material in the liner protects against cold but is breathable at the same time. The undercarriage consists of a Dutch manufactured lightweight plastic frame with a stainless steel blade.
A handy Multitube for around the neck or head. Can be used as a neck warmer, hat, bandana, as a sweat cap under your helmet, and more.
The Viking Option shoe is the first soft boot that is equipped with a Viking patented thermoplastic structure
Top quality and precise sharpening jig for short track and long track blades.
This high performance skate boot can be fully molded to your foot thanks to thermo fitting and suitable for both recreational and competitive use. The increased thermoplastic ankle pockets and fitted fit provide optimal support and steering. Ideal for comfortable and technical skating.
Add some extra warmth by wearing these under your regular gloves. Not a cut resistant item, a comfort item.
The Viking Protector Glove is a comfortable glove made of durable and cut-resistant material. The cut-resistant glove is the perfect glove for optimum protection during skating. The Viking Protector Glove is available in the color black and in six different sizes.
Ice skating on Nordic blades is becoming increasingly popular. Just like traditional speed blades these long blades need maintenance such as sharpening and polishing. Zandstra Sport has developed a special sharpening jig for Nordic skates, called “VING UPP”.
The main advantages of the VING UPP are:
– The binding can stay on the frame
– The Upp fits all types, models and brands
– The Upp fits all sizes
– Blades can be easily and firmly clamped
– Compact, low weight, easy to carry
Ergonomic design Apogee exclusive head lock adjustment Evacuation channels for better air circulation and moisture evacuation Easy and safe adjustment of the belts S / M: 55-58 cm L / XL: 58-61 cm
Black/White
White
The most comfortable and cut resistant glove. This glove gives more warmth and is with cut level 4.
They are available in 2 designs : white/black or white
– They are made of synthetic leather & micro mesh material
– The cut resistant material is Spectra and the cut level is 4
High density foam knee protection covered with extensible nylon.
The best protection at a very low cost.
Size : XS – S – M – L – XL
The perfect glove for the beginner. Great fit, high quality goat skin leather.
Ultra durable polycarbonate lenses.
Suitable for younger skaters, these eye guards offer UV 400 protection.
Includes wrap around black nylon frame and comfortable TPR nose pads.
Tested and passed ASTM F803 specifications.
The perfect skate for on the oval. The platform of the Competition skate is the same as that of the Delta Fit All.
The only differences are:
– a blunt front runner
– shorter blade length
– super sharp bimetal steel for perfect traction.
These adaptations make this type of blade more suitable for the 400-metre oval.
The Competition is available in sizes 40, 42, 44 and 46 cm.
This redesigned platform of the Delta skate now lets you mount any NIS binding – Xcelerator, Exercise, or Performance models – quickly and easily at home without any tools. Plus you still get the legendary quality tool steel that stays sharp for a long time.
Nordic ice blade for cross-country touring on frozen lakes, canals and outdoor rinks.
The Delta Fit All is made out of a strong triangular aluminum profile.
The blade’s patented attachment uses slots instead of holes, so that any binding fits on this skate blade.
The position of all bindings can be adjusted according to personal preference so that the right balance can be found.
Stretchy and form-fitting, these warm up pants are perfect for training on cold days or waiting for your race. Full zip legs that separate at the top make it easy to get in and out of them with your skates on. Fabric is brushed inside for coziness.
The Argon is designed for extra stability while maintaining critical levels of sensitivity and feedback. The additional stiffness engineered into the Argon offers superior grip without compromising control and feel.
Visor for Alpha helmet. Single lens in clear, yellow or smoke. Price per visor.
The R Series 2 or R2 is a hand made carbon composite boot made with Bont’s famous one-piece construction method. The boot is made by hand from the inside out with every layer bonding or sewn to the layer under it. Paired with entry level Ultrasprint blades.
Black
White
Nice Skating Helmet is Super light (265gr) and a well-ventilated skating helmet.
The High density EPS material is shock absorbing. and offers good protection. The 3D aerodynamic design ensures the ultimate aerodynamic level. The in-mold technology on the skating helmet absorbs the shock universally through the helmet. Thanks to the adjustable chin strap and spiderlock system, the helmet can be used for young and old.
Certificates with which the skating helmet meets are from ASTM and because of this it is approved by the ISU. CE-CPSC-ASTM-AS / NZS-TUV-EN1078
Frank’s Signature Diamond Sheets are replacement sheets for sharpening plates.
Simply remove the old diamond sheet from the plate and install the new one. The replacement sheets have a sticky side, just remove the protective paper before installing.
When choosing your options, note that the larger the number, the softer the stone will be. The black sheet is therefore rougher and the gold sheet softer.
Choosing the grit:
-Black (140)
-Blue (400)
-Red (600)
-Gold (1200)
Frank’s Signature Diamond Sheets are replacement sheets for sharpening plates.
Simply remove the old diamond sheet from the plate and install the new one. The replacement sheets have a sticky side, just remove the protective paper before installing.
When choosing your options, note that the larger the number, the softer the stone will be. The black sheet is therefore rougher and the gold sheet softer.
Choosing the grit:
-Black (140)
-Blue (400)
-Red (600)
-Gold (1200)
Frank’s Signature Diamond Sheets are replacement sheets for sharpening plates.
Simply remove the old diamond sheet from the plate and install the new one. The replacement sheets have a sticky side, just remove the protective paper before installing.
When choosing your options, note that the larger the number, the softer the stone will be. The black sheet is therefore rougher and the gold sheet softer.
Choosing the grit:
-Black (140)
-Blue (400)
-Red (600)
-Gold (1200)
The Bont Puresprint is an entry-level blade for skaters wanting to try short track speed skating. The steel has been tempered to be resilient to breaking due to crashes or blade clashes. Okay for new skaters.
